Varathane Diamond Wood Finish Outdoor (Water-Based)

Varathane Diamond Wood Finish Outdoor (Water-Based) is a Water-based exterior clear finish wood finish available at Windsor Plywood. Fast-drying water-based outdoor formula with UV inhibitors and water repellency for protection against sun, rain, and weathering.

Features

• Provides durable protection for exterior decks, fences, and outdoor furniture surfaces
• Non-yellowing formula preserves the natural colour of the wood (water-based) or adds warm amber tone (oil-based)
• Resists water, stains, and household chemicals
• Self-leveling for a smooth, even finish
• Clean up with water after application

Specifications

Common Uses

Varathane Diamond Wood Finish Outdoor (Water-Based) is used to protect and enhance exterior decks, fences, and outdoor furniture wood surfaces in residential and light commercial applications. Apply over bare, stained, or previously finished wood surfaces that have been properly prepared and sanded.

Pro Tips

• Apply at temperatures between 13 degrees C and 32 degrees C with relative humidity below 85%.
• Stir gently before use -- do not shake. Shaking introduces air bubbles that appear in the cured finish surface.
• Sand lightly between coats with 220-grit sandpaper and remove all dust before applying the next coat.

Frequently Asked Questions

How many coats should I apply?
For most interior applications, 2-3 coats of Diamond Wood Finish Outdoor (Water-Based) provide adequate protection. Apply thin, even coats and sand lightly between coats.

What is the difference between water-based and oil-based finish?
Water-based finishes dry clear, have low odour, and dry faster. Oil-based finishes add a warm amber tone, have stronger odour, and take longer to dry but typically build a harder film. For light-coloured woods such as maple and birch, water-based is recommended to preserve the natural colour.