10.5mm Winchester Vinyl Tile Flooring - Classic Rock

Classic Rock is part of the Winchester 10.5mm Vinloc vinyl tile collection, available at Windsor Plywood. The Snap Lock installation system requires no glue, nails, or additional underlay. Water resistant construction makes it suitable for kitchens, bathrooms, and areas where moisture prohibits wood-based floor coverings.

Features

• Snap Lock click installation -- no glue, nails, or underlay required
• Water resistant construction
• IIC 73 sound rating -- condo and strata approved
• FloorScore certified for indoor air quality
• Stone and tile look surface with easy-clean finish
• No grout required

Specifications

Common Uses

Winchester Vinloc vinyl tile in Classic Rock is used for bathroom floors, kitchen floors, laundry rooms, and any room where a tile look is desired without the weight, installation complexity, or cold feel of ceramic tile.

Pro Tips

• Install vinyl tile over a flat, clean subfloor -- high or low spots greater than 3/16" over 10 feet should be levelled before installation.
• In bathrooms, apply silicone caulk at the tile-to-wall transition -- vinyl tile moves with temperature changes and rigid grout at these transitions will crack.
• Use a pull bar and tapping block when clicking tiles together -- avoid striking the tiles directly with a hammer.

Frequently Asked Questions

Does vinyl tile feel cold underfoot like ceramic?
No. Vinyl tile is significantly warmer to the touch than ceramic or porcelain tile. The foam or rigid core construction insulates the floor surface from the cold subfloor below.

Can vinyl tile be installed over existing ceramic tile?
Yes, in most cases. The existing tile must be firmly bonded, flat, and free of broken or loose tiles.