07706 4-1/8" Colonial Baseboard Primed MDF

07706 4-1/8" Colonial Baseboard Primed MDF is a smooth, knot-free MDF baseboard, factory-primed and ready for topcoat. Baseboard runs along the base of interior walls, concealing the expansion gap between the flooring and drywall while protecting the lower wall from scuffs, furniture, and cleaning equipment. Available at Windsor Plywood locations across Canada.

Features

• Factory-primed MDF -- smooth, knot-free surface paints to a flawless finish without site priming
• Consistent density throughout -- no grain telegraphing, no knots, no resin bleed under paint
• Colonial profile at 07706 -- Interior -- wall and floor transition
• Available at Windsor Plywood locations across Canada -- confirm stock at your local branch

Specifications

Common Uses

Installed at the base of all interior walls. Nail into wall studs with 2" finish nails at 16" stud spacing. MDF is a paint-only material. It does not accept stain and must be kept dry -- do not install in bathrooms or high-humidity areas.

Pro Tips

• Cut inside corners with a cope joint rather than a mitre for a tighter, longer-lasting fit. Coped joints stay closed as wood moves seasonally -- mitred inside corners tend to open up.
• Apply two coats of quality interior latex paint in satin or semi-gloss directly over the factory primer. Seal all cut edges with primer before painting -- exposed MDF edges absorb paint unevenly.
• Use a stud finder before nailing. Set all nails below the surface, fill with paintable wood filler, and sand smooth before finishing.

Frequently Asked Questions

What height baseboard should I use?
Baseboard height should be proportional to ceiling height. 3" to 3-1/2" for 8 ft ceilings, 4" to 5" for 9 ft, and 5" or taller for 10 ft and above. Taller baseboard creates a more formal appearance.

Can I use MDF moulding in a bathroom?
No. MDF absorbs moisture and swells irreversibly. Use solid wood (hemlock or cedar) moulding in bathrooms and high-humidity areas.