2-1/4" Door & Window Casing – Pine, Finger Jointed, Primed

This 2-1/4" primed finger-jointed pine door and window casing is a factory-primed interior trim profile available at Windsor Plywood. This is an E2E (edge to edge) flat-profile casing with consistent thickness across the full face width. Casing frames door and window openings by covering the gap between the jamb and the surrounding wall surface.

Features

• Factory-primed surface -- ready for finish painting on site
• Finger-jointed pine construction for dimensional stability
• Frames door and window openings with a clean, finished appearance
• Suitable for all standard interior door and window jamb installations
• Available in standard lengths -- confirm at your local Windsor Plywood

Specifications

Common Uses

2-1/4" primed pine casing is used to frame interior door and window openings throughout the home. It covers the gap between the door or window jamb and the surrounding drywall, providing a clean, finished transition. It is applied to all three sides of a door opening and to all four sides of a window opening.

Pro Tips

• Cut casing joints at 45 degrees at the head corners using a mitre saw -- mitre joints produce a cleaner appearance than butt joints.
• Leave a 1/8" reveal on the jamb edge -- set the casing back 1/8" from the inside face of the jamb rather than flush.
• Nail casing through the drywall into the framing at the outer edge, and nail into the jamb at the inner edge.

Frequently Asked Questions

What size casing is most common for interior doors?
The most common interior door casing widths in Canadian residential construction are 2-1/4" and 2-1/2". Wider profiles (3" and above) are used for craftsman and traditional styles.

What is the difference between E2E casing and standard casing?
E2E (edge to edge) casing is a flat-profile casing with consistent thickness across the full width. Standard casing profiles typically have a back bevel that allows the trim to sit flat even on slightly irregular wall surfaces.