Custom Rocking Chair by Alistair
Hi my name is Alistair, I live in Calgary AB. Below is a rocking chair I built from a variety of wood. It is made from walnut, cherry, ash, poplar and spruce most of which were purchased from the south location Windsor Plywood in Calgary.
The chair is 43 ply's glued up and then carved with chainsaw, angle grinder and chisels. It is then sanded with an orbital sander down to hand sanding to a 400 grit. The finish is a pre-catalysed lacquer that has been sanded between coats and polished.
It was a super fun project and I look forward to making more of these, thanks for all your great products Windsor Plywood!!
You can see my other work at standingdeadwoodworks.com