Find Your Store
Osmo is a German-based pioneer in natural wood finishes, renowned for its high-quality, eco-friendly products that enhance and protect wood surfaces both indoors and out. With over 140 years of experience in wood and coatings, Osmo has developed a range of finishes that combine the benefits of oils and waxes to provide durable, breathable protection while highlighting the natural beauty of wood. Osmo's commitment to sustainability is evident in its use of natural ingredients and its efforts to produce finishes that are safe for humans, animals, and plants. The finishes meet the DIN EN 71.3 standard for children's toys and the DIN 53160 standard for resistance to perspiration and saliva. As a proudly Canadian retailer, Windsor Plywood offers a selection of Osmo's innovative wood finishes, providing customers with environmentally responsible options to enhance and protect their wood projects.
Frequently Asked Questions
What epoxy products does Windsor Plywood carry?
Windsor Plywood carries epoxy resins and hardeners for woodworking applications including river table and live edge fills, void and crack repairs, surface coatings, and structural adhesive bonding. Products are available in formulations suited to deep pours, thin coating layers, and high-clarity tabletop applications.
What is the difference between casting epoxy and tabletop epoxy?
Casting epoxy is formulated for deep pours with a slower cure rate that allows heat from the curing reaction to dissipate without cracking or yellowing. Tabletop epoxy is designed for thin coats applied over a surface for protection and gloss, with a faster cure and a harder final surface. Using casting epoxy as a tabletop coat or vice versa produces poor results.
How do I prevent bubbles in epoxy pours?
Mix epoxy thoroughly but slowly to avoid whipping air into the resin. After pouring, pass a heat gun or propane torch briefly over the surface at a distance of 6 to 8 inches to reduce surface tension and pop bubbles. Work in a warm environment above 20 degrees Celsius, as cold epoxy is thicker and traps more air.
Can epoxy be used outdoors?
Standard epoxy resins are not UV-stable and will yellow and degrade with prolonged sun exposure. For outdoor applications, use a UV-resistant epoxy formulation or apply a UV-stable topcoat over cured epoxy. Ecopoxy and similar UV-rated products are engineered for outdoor use. Windsor Plywood can advise on which products in stock are rated for exterior applications.
How much epoxy do I need for a river table pour?
Calculate the volume of the void in cubic inches and convert to fluid ounces. One fluid ounce is approximately 1.8 cubic inches. Add 10 to 15 percent for waste and overflow. Pour in layers no deeper than the product's recommended maximum single-pour depth to avoid exothermic overheating, which causes cracking and yellowing in thick pours.