Hope Blooms – Windsor Plywood Prince George

“We were honoured to be asked to be part of this special project made by Angela’s Attic. Specially constructed, designed, and donated to the Canadian Cancer Society Daffodil Campaign in April 2021. She did an amazing job repurposing a vintage head and footboard into a sitting bench that will now live in the Kordyban Lodge. … Continued

TV Stand by Ken Saumure

Ken Saumure of Calgary, AB just finished another project. A TV stand that he designed and built with materials and hardware from the Windsor Plywood Airdrie location. It’s just 3/4″ Birch plywood and milled Pine but it turned out really well. It was his first time applying a finish (Benjamin Moore water based latex paint) … Continued

A Table and a Stand

Dan Kleer of Airdrie has had a couple of projects completed recently. One, a table with the top made of Maple and the legs made of Pine, were both sourced from Windsor Plywood. He ran some threaded pipe in between the legs to give it a more rustic look. The table measures approximately 42″ high … Continued

Quick and Easy DIY Cedar Potting Bench

Stirling Noyes from the Windsor Plywood head office built this cedar potting bench for his front patio. This project was built using 1×4 Cedar boards, 1×2 Cedar boards, and 4×4 Cedar posts. All cuts were done with a miter saw and fastened together with 1-1/4 inch wood screws and finishing nails. Finally, like the raised … Continued

Drill Press Drum Sander Jig

drill press drum sanding jig

Stirling from the Windsor Plywood head office built this drill press drum sander jig. It uses 1/4″ Baltic Birch Plywood from the Langley Windsor Plywood. The drum sanding attachment fits in the hole on the top of the jig with a hole on the side used for a vacuum hose. For the top and side … Continued

Wooden Paddles

Joe from Thunder Bay makes these beautiful wooden paddles, using 99% of his woods from Windsor Plywood in Thunder Bay! He makes between 100 and 200 a year and ships them throughout Canada, the USA and worldwide. Check out Joe’s paddles and other creations at: www.joeopaddles.com #mywindsorproject #woodpaddles #windsorwoods #thunderbay #joeopaddles

Darcy’s Business Card Holder

business card holder small

The following project was shared from the store owner of Fort St. John Windsor Plywood. Dan, who is a regular customer at the Fort St. John store made a unique cardholder display. See more interesting projects at Dabue custom woodcraft