Sapele Coffee Table

Peter Moran of Bellingham shared with us his most recent project – a Sapele Coffee Table. He had this to say about the process: I’ve made plenty of coffee tables, but never worked with Sapele until I came across a board 14 inches wide at my local Windsor Plywood store that I just had to … Continued

Hairpin Leg turns 80!

live edge table with hairpin legs

A Modern Classic Furniture makers can join in the celebration, as the hairpin leg turns 80 years old. Trendily retro, it is enjoying a bump in popularity along with everything in mid-century modern design, as well as designs favouring mixed metal and wood. The story behind the iconic metal table leg design called ‘the hairpin,’ … Continued

“3 Lakes” Olive Wood Epoxy Table

ecopoxy project

Another beautiful project from the folks in Lloydminster Windsor Plywood… the “3 lakes table” This one we flattened using drum sander/ spot sanding and sealed off the open holes using melamine and silicone (to avoid excessive spillage). We tinted the epoxy to make it blue and poured the holes full. Once dried (2-3 days for … Continued

Lloyminster’s Table Made from Hickory Shorts

hickory shorts table

The Windsor Plywood Lloydminster wood shop has been busy! Pictured, is a custom, 5′ diameter, Hickory table. Stunning grain variance in Hickory!                  

Don’s Zapatero Bar Top and Oak Coffee Table

zapatero bar top thumbnail

The following email was shared from West at Windsor Plywood Nanaimo. Here are pictures of the bar top I made from the Zapatero wood I purchased from Windsor Plywood in January 2018. . I also included a picture of the coffee table I made from the live edge oak I also bought from Windsor Plywood. … Continued

Project in the Works! Red Oak Live Edge Table

live edge red oak table 2

This is a table project in the works. The Windsor Plywood store near Victoria, BC has been preparing a large piece of Red Oak for a customer. The table is made from live edge red oak and the underside has been finished with a coat of Minwax Poly. The table measures 6 feet long by … Continued

Jeffery’s Wine Barrel Coffee Table

wine barrel table

Customer project from Windsor Plywood Langley. Coffee table made from an oak wine barrel. The project, created by Jeffery, is part of a monthly series the Langley store has started; featuring the creative works of their talented and loyal customer base.

Ed’s “Four Leaf Clover” Coffee Table

eds four leaf clover table

Designed and built by Windsor Plywood Sherwood Park employee, Ed. It’s an one-of-a-kind Maple Burl and finished with Osmo stain. The top sits on top of Ed’s interpretation of a mid-century modern base. The base was made of maple and finished with six coats of General Finishes High-Performance satin top coat, tinted with ebony dye. … Continued

Kim’s Spalted Maple Kitchen Table

spalted maple table

Customer project from Kim, a long time customer at Windsor Plywood Langley Spalted Maple 40″ x 108″ kitchen table with custom-made heavy-duty steel table legs. It was treated with only a natural oil finish and clear water-based floor finish for surface protection.