Stirling from the Windsor Plywood head office built a house number sign to attach to the new siding on his house. He used purpleheart from the Windsor Plywood Langley location for mounting the Taymor 6″ LED-backlit numbers. Mounting on board minimizes the amount of hardware needed to attach the sign to the hardboard siding. The … Continued
As the challenging year 2020 winds down, the Windsor Plywood stores and their crew have put together some needed Christmas cheer. The COVID-19 pandemic and its profound effects have brought upon us unprecedented challenges. With careful regard, the staff from each store, as well as their loyal customers and partners in businesses, are finding all … Continued
The team at Windsor Plywood Brandon have ingeniously crafted a hands-free hand sanitizer station (pictured left). It is specifically for use by customers visiting the store. A quick reminder to everyone entering the store that there is hands-free sanitation set-up as soon as they walk in the store. In addition, there are also hand sanitizer … Continued
Stirling Noyes from the Windsor Plywood head office built this cedar potting bench for his front patio. This project was built using 1×4 Cedar boards, 1×2 Cedar boards, and 4×4 Cedar posts. All cuts were done with a miter saw and fastened together with 1-1/4 inch wood screws and finishing nails. Finally, like the raised … Continued
Ron Gellatly came to Windsor Plywood at Parksville back in December of last year (2019) with a history of cabinet making, woodturning and art. He recently finished the Woody carved mascot and the a salvaged Fir dunnage clock. He has this to say about the process it took to finish the projects: I built the … Continued
Windsor Plywood, Brandon has a unique custom 1949 Ford that was transformed into a 50 Year Anniversary model for Windsor Plywood. This truck has the whole engine gutted, so ‘V0’ is a new decal that was put on to represent the engine (ha ha). All painted in Windsor Blue, and the “Celebrating 50 Years” logo … Continued
Stirling from the Windsor Plywood head office built this drill press drum sander jig. It uses 1/4″ Baltic Birch Plywood from the Langley Windsor Plywood. The drum sanding attachment fits in the hole on the top of the jig with a hole on the side used for a vacuum hose. For the top and side … Continued
Another beautiful project from the folks in Lloydminster Windsor Plywood… the “3 lakes table” This one we flattened using drum sander/ spot sanding and sealed off the open holes using melamine and silicone (to avoid excessive spillage). We tinted the epoxy to make it blue and poured the holes full. Once dried (2-3 days for … Continued
The Windsor Plywood Lloydminster wood shop has been busy! Pictured, is a custom, 5′ diameter, Hickory table. Stunning grain variance in Hickory!
