“3 Lakes” Olive Wood Epoxy Table

Another beautiful project from the folks in Lloydminster Windsor Plywood… the “3 lakes table”

This one we flattened using drum sander/ spot sanding and sealed off the open holes using melamine and silicone (to avoid excessive spillage). We tinted the epoxy to make it blue and poured the holes full. Once dried (2-3 days for liquid plastic at 2:1 ration) we sanded with belt sander all the way up to 400 grit or so and oiled the piece using Livos.

ecopoxy project 2

 

 

 

 

 

 

 

ecopoxy project 3